HF1 MD VX Ultra Adjustable Flight Forming Machine

Outer Diameter (OD) 200mm to 1,350mm (With the purchase of an SD Adaptor Kit - A full range extending from 50mm to 1,350mm diameter can be achieved with this machine)

Pitch: Extends up to 1,200mm

Plate thickness: Up to 32mm in Mild Carbon Steel Grade 350, and Stainless Steel

Up to 16mm in Hardox 450/500 HB (TUF) and other Abrasion Resistant plates

Helix Flight Forming Machines are specifically designed to form sectional helices cut from flat plate. Our advanced Helix Forming technology allows simple, safe and swift operation while delivering True Form helices at the lowest whole-of-life cost per helix produced.

HF1 MD VX Ultra Adjustable Flight Forming Machine

Guidance above is subject to the conditions and limitations shown below:

  • Indicated machine ranges are based on 250Mpa Yield Strength Plate, and the Range of sizes will be affected by the varying Grades of material used.
  • Maximum Pitch is a function of the diameter to fit the shaft, and is limited accordingly
  • Extended diameter and pitch range may be achieved if the flange width is less than 25% of the diameter
  • The Pitch may be limited by the material thickness, which may be too thin to hold the correct form
  • Forming Abrasion Resistant material may require the use of special high-wear forming plates
  • Forming of Abrasion Resistant material may be limited by the forming force of the machine, limitations in pitch due to the material's increased spring back, and limitations of the material to stretch during forming without cracking
  • The maximum achievable plate thickness is subject to both the pitch to shaft diameter ratio, and the maximum flange width cross-sectional area for the respective machine being used

DIMENSIONS OF HELIX FLIGHT MACHINES

Machine Type HF1 SD VX HF1 MD VX HF1 MD HD HF1 ID HD
Dimensions
Length 1.25m 2.8m 2.8m 3.4m
Width 1.3m 2.5m 2.5m 2.8m
Height 1.0m 1.4m 1.4m 2.0m
Weight 2.0t 5.21t 9.0t 12t
Motor Size 9.5kW 9.5kW 15kW 15kW
Requirements
Clearance around all sides 0.5m 1.0m 1.0m 2.0m
Clearance on operator side 0.5m 1.0m 1.0m 2.0m
Required power source 3ph 3ph & 1ph 3ph & 1ph 3ph

IMG 1619
Untitled 4
DSC04087
Image007
IMG 1346
Image006
IMG 1333
Image005
IMG 8022
Image004
Image003
5
Screen Shot 2016 07 29 At 12.28 20

Enquiry Form

Fill in the form below to enquire about this service. Please make sure you fill in all required (*) fields.

Name *
 
Company Name
 
Email Address *
 
Phone Number (please include your country code)
 
Website Address
 
Enquiry
 
 
 

Click Here for the Detailed Enquiry Form

© Helix Flight 2022 | By Website Angels |Terms & Conditions