HF1 MD VX Ultra Adjustable Flight Forming Machines

Outer Diameter – 200mm to 1350mm (With purchase of an SD Adaptor kit - A full range of 50mm to 1350mm diameter can be achieved)

Pitch – up to 1200mm

Plate thickness up to 32mm in mild carbon steel grade 350 and stainless steel

Up to 16mm in Hardox 450/500 Tuf and other abrasion resistant plates

Helix Flight Forming Machines are specifically designed to form sectional helices cut from flat plate. Our advanced forming technology allows simple safe operation while delivering true form helices at the lowest whole of life cost per helix.

HF1 MD VX Ultra Adjustable Flight Forming Machines

Guidance above subject to below conditions and limitations

  • Indicated machine ranges are based on 250Mpa Yield Strength Plate & range of sizes will affected by alternate grades.
  • Maximum Pitch is a function of diameter to fit the shaft and will be limited accordingly
  • Extended Diameter and pitch range may be achieved if flange width is a less than 25% of Diameter.
  • Pitch may be limited for material thickness to thin to hold form
  • Forming Abrasion-resistant material may require special high wear forming plates
  • Forming of abrasion-resistant material may be limited by the forming force of the machine, limitations in pitch due to increased spring back and limitations of the material to stretch during forming without cracking
  • The maximum achievable plate thickness is subject to both pitch to shaft diameter ratio and the maximum flange width cross-sectional area for the respective machine.

DIMENSIONS OF HELIX FLIGHT MACHINES

Machine Type HF1 SD VX HF1 MD VX HF1 MD HD HF1 ID HD
Dimensions
Length 1.25m 2.8m 2.8m 3.4m
Width 1.3m 2.5m 2.5m 2.8m
Height 1.0m 1.4m 1.4m 2.0m
Weight 2.0t 5.21t 9.0t 12t
Motor Size 9.5kW 9.5kW 15kW 15kW
Requirements
Clearance around all sides 0.5m 1.0m 1.0m 2.0m
Clearance on operator side 0.5m 1.0m 1.0m 2.0m
Required power source 3ph 3ph & 1ph 3ph & 1ph 3ph

Enquiry Form

Fill in the form below to enquire about this service. Please make sure you fill in all required (*) fields.

Name *
 
Company Name
 
Email Address *
 
Phone Number (please include your country code)
 
Website Address
 
Enquiry
 
 
 

Click Here for the Detailed Enquiry Form

© Helix Flight 2021 | By Website Angels |Terms & Conditions